Product Overview
RTZ Dodge RAM D100 D150 D200 D250 Pickup Truck Full Lift Kit – 3" Front Coil Spring Spacers + 3" Rear Steel Lift Blocks + DoestchTech DT9000 Nitro Shocks (1972–1993 2WD)
When you want your 1972–1993 Dodge RAM D-Series pickup to sit level front to rear at the same lift height, the RTZ 3 front 3 rear full lift kit is the configuration that gets you there. Built for the D100, D150, D200, and D250 2WD pickup, this equal-height package includes solid aluminum bottom-mounted front coil spring spacers, 3-inch tapered Gorilla rear steel lift blocks with hardware, and a full set of DoestchTech DT9000 Nitrogen Gas Charged Shocks everything needed for a matched front and rear lift in one bolt-on kit. If you're looking to buy a Dodge RAM D150 3 3 lift kit online, this complete package delivers the maximum equal-height configuration available for the classic D-Series platform.
The front coil spring spacers are bottom-mounted into the lower control arms beneath the 2WD D-Series coil springs, solid aluminum, built on a 2-to-1 lift ratio so the spacer is physically smaller than the 3-inch lift it produces once installed. At the rear, 3-inch Gorilla fabricated steel blocks are tapered for correct pinion angle, powder-coated against rust, and guaranteed never to break, with zinc-plated grade OEM 1541 U-bolts and all necessary hardware included. The DoestchTech DT9000 nitrogen gas-charged shocks deliver improved control, stability, and drivability while adapting to changing terrain at the new ride height.
What's Included:
- Pair of 3-inch front solid aluminum coil spring spacers, bottom-mounted, seats into lower control arms
- Rear 3-inch tapered Gorilla steel lift blocks, tapered for pinion angle, powder-coated
- Zinc-plated grade OEM 1541 U-bolts and hardware included
- Full set of DoestchTech DT9000 Nitrogen Gas Charged Shocks
- Improves appearance and maintains comparable factory ride
- Direct bolt-on installation; no cutting, no welding, no extra parts required
- Alignment recommended after installation
- Made in the USA
- Limited Lifetime Warranty
Note: Shocks may look different depending on application.
Fitment: Compatible with 1972–1993 Dodge RAM D100, D150 Pickup Truck 2WD. Please check our other listings for D200, D250 applications and other lift heights.
Matching front and rear lift height on a classic D-Series Dodge truck creates a stance that looks intentional from every angle: no rake, no visual imbalance between axles. With both ends at 3 inches, this is the equal-height version of the D-Series lift range and the right kit for owners who want a level, fully lifted classic truck without any fabrication required. Professional installation by a qualified technician with proper equipment is strongly recommended due to extreme suspension loads. Please inspect all parts before beginning installation.
Browse our full range of Dodge Ram D100 D150 Lift Kits to compare the 3/2 and 3/3 configurations for your D-Series pickup. For a complete breakdown of how coil spring spacers and block kits work in a suspension lift, read our guide on how a truck suspension lift kit works.
Order the RTZ Dodge RAM D150 3 3 lift kit for sale today and get your classic D-Series pickup sitting level and lifted front to rear.
Frequently Asked Questions
- How does the 3/3 kit differ from the 3/2 kit for the D-Series pickup?
Both kits use the same 3-inch front coil spring spacers. The 3/3 kit adds 3-inch rear steel blocks for a fully level equal-height stance, while the 3/2 kit uses 2-inch rear blocks for a slight front-to-rear rake. Choose the 3/3 if you want both axles at the same height. - Is this the same platform as the Dodge B-Series van?
No. The D-Series is a pickup truck platform with different dimensions and suspension geometry from the B-Series van. Both use a similar bottom-mounted front spacer design, but the kits are vehicle-specific; always confirm the correct platform before ordering. - Are all hardware and fasteners included for the rear block installation?
Yes. Zinc-plated grade OEM 1541 U-bolts and all necessary hardware for the rear 3-inch steel block installation are included in this kit.
