RTZ - Compatible with Ford Ranger 1982-1997 Pickup Truck Full Solid Series Lift Kit 3" Coil Springs + 2" Tapered Lift Block Kit + Set of DoestchTech Nitro Gas Charged Shocks 2wd

RideTrendZ

(No reviews yet) Write a Review
MSRP: $699.95
$595.95
(You save $104.00 )
SKU:
553332
Adding to cart… The item has been added

Product Overview

Give your 1982–1997 Ford Ranger 2WD pickup a commanding, level stance with the RTZ Solid Series 3/2 lift kit. Engineered specifically for classic 2WD Ford Ranger trucks, this complete suspension package combines heavy-duty front coil springs, rear tapered lift blocks, and premium gas-charged shocks to improve ground clearance while preserving comparable factory ride quality.

The front setup features high-tensile alloy steel 3-inch lift coil springs, heat set to eliminate spring fatigue and load tested to meet sport spring rate standards. At the rear, Gorilla fabricated steel 2-inch lift blocks are precision tapered to maintain proper drive pinion angles and prevent drivetrain vibration. A full set of Doetsch Tech premium nitrogen gas-charged shocks is included to adapt smoothly to changing road surfaces and off-road terrain.

Key Features & Benefits

  • Balanced 3/2 Stance: Delivers 3 inches of front lift and 2 inches of rear drop correction for an aggressive, level stance.

  • High-Tensile Coil Springs: Heat-set alloy steel front coils resist sagging, fatigue, and load strain over time.

  • Tapered Rear Blocks: Fabricated steel rear blocks are tapered for proper drive pinion angle alignment.

  • Nitrogen Gas-Charged Shocks: Includes a set of premium Doetsch Tech shocks to maintain vehicle stability and dampening control.

  • Heavy-Duty Hardware Pack: Equipped with zinc-plated OEM grade 1541 / Grade 8 U-bolts and mounting hardware.

  • Direct Drop-In Installation: Designed to bolt directly onto factory mounting points without cutting or welding required.

Product Specifications

Specification Details
Brand RTZ
Product Type Full Truck Suspension Lift Kit
Vehicle Compatibility 1982–1997 Ford Ranger Pickup
Drivetrain 2WD Only
Front Lift Height 3 Inches
Front Components High-Tensile Alloy Steel Lift Coil Springs
Rear Lift Height 2 Inches
Rear Components Fabricated Steel Tapered Blocks & Grade 8 U-bolts
Shocks Included Doetsch Tech Premium Nitrogen Gas-Charged Shocks
Finish Powder-Coated Blocks & Zinc-Plated Hardware
Installation Bolt-On (No cutting or welding required)
Warranty Manufacturer Limited Lifetime Warranty
Country of Origin USA

Vehicle Compatibility & Fitment

This RTZ lift kit is listed for:

  • 1982–1997 Ford Ranger Pickup Truck (2WD)

Important Fitment Notes:

  • Designed strictly for 2WD models; will not fit 4WD models.
  • Vehicle wheel alignment is strongly recommended following installation.
  • Check suspension and vehicle configuration before ordering.

What's Included in the Kit?

  • Pair of 3-inch front lift coil springs
  • Pair of 2-inch rear tapered steel lift blocks
  • Set of Doetsch Tech nitrogen gas-charged shocks (Front & Rear)
  • OEM grade 1541 / Grade 8 zinc-plated U-bolts and hardware
  • RTZ brand decal

Installation & Warranty

This kit is engineered as a direct drop-in setup with no cutting or frame welding required. Because suspension installation involves supporting heavy load requirements, inspect all component parts prior to assembly. Professional installation by a certified automotive technician with suspension safety training and proper equipment is strongly recommended.

Backed by a Manufacturer Limited Lifetime Warranty against defects in materials and craftsmanship.

Frequently Asked Questions

Will this 3/2 lift kit fit 4WD Ford Ranger models?

No, this kit is engineered exclusively for 1982–1997 2WD Ford Ranger models. 4WD Ranger trucks feature a different front axle geometry and require a specific 4WD kit.

Does installing this kit require cutting or welding on the frame?

No cutting or frame welding is required. This system is a direct bolt-on drop-in kit engineered to mount directly using existing factory mounting locations.

Why are the rear lift blocks tapered?

The rear blocks are tapered to correct drive axle pinion angles after lifting the vehicle by 2 inches. This prevents driveline binding, reduces stress on universal joints, and eliminates unwanted highway speed vibrations.

Do I need an alignment after installing this 1982-1997 Ford Ranger 3/2 lift kit?

Yes. Any time front coil springs or height changes are made to a Twin I-Beam suspension setup, a full wheel alignment is required to ensure proper tire wear and predictable handling.

Explore More Suspension Options

Looking for additional lift setups or vehicle categories? Explore these related options: Browse all Ford Lift Kits, check out our full selection of Truck Lift Kits, or view the Chevy GMC C10 3/2 Full Lift Kit.

Get 5% Off Your Order

Use coupon code RIDETRENDZ at checkout to receive the advertised 5% discount.

Reviews

(No reviews yet) Write a Review