RTZ - Compatible with Dodge RAM B150 B250 Van 71-01 Full Lift kit Front 2.5" Lift Coil Spring Spacers + Rear Steel Tapered 2" Lift Block Kit + Set of Doestch Tech DT9000 Nitro Shocks Leveling 2wd

RTZ Dodge RAM B150 B250 Van Full Lift Kit – 2.5" Front Coil Spring Spacers + 2" Rear Steel Lift Blocks + DoestchTech DT9000 Nitro Shocks (1971–2003 2WD)

When the 2-inch front and 1.5-inch rear configuration on the Dodge B-Series van is not quite enough, the RTZ 2.5 front and 2 rear full lift kit steps it up at both ends. Built for the 1971–2003 Dodge RAM B100, B150, B1500, B200, B250, and B2500 van 2WD, this complete package delivers half an inch more of front lift and half an inch more of rear lift compared to the entry-level kit with the same solid aluminum bottom-mounted front spacers, Gorilla tapered rear steel blocks, and DoestchTech DT9000 Nitro shocks included. If you're looking to buy a Dodge B150 B250 2.5 inch lift kit online, this is the step-up configuration that gives your van a more noticeable rise without requiring any additional parts or modifications.

The front coil spring spacers are bottom-mounted into the lower control arms beneath the 2WD coil springs and made from solid aluminum built on a 2 to 1 lift ratio so the spacer height is less than the 2.5 inch lift achieved once installed. At the rear, Gorilla fabricated steel blocks are tapered for correct pinion angle, powder-coated against rust, and come with zinc-plated grade OEM 1541 U-bolts and all necessary hardware. The DoestchTech DT9000 nitrogen gas-charged shocks improve control, stability, and drivability while adapting to changing terrain at the lifted ride height.

What's Included:

• Pair of 2.5-inch front solid aluminum coil spring spacers, bottom-mounted, seats into lower control arms 
• Rear 2-inch tapered Gorilla steel lift blocks, tapered for pinion angle, powder-coated 
• Zinc-plated grade OEM 1541 U-bolts and hardware included 
• Full set of DoestchTech DT9000 Nitrogen Gas Charged Shocks 
• Improves appearance and maintains comparable factory ride 
• Direct bolt-on installation; no cutting, no welding, no extra parts required 
• Alignment recommended after installation 
• Made in the USA 
• Limited Lifetime Warranty

Note: Shocks may look different depending on application.

Fitment: Compatible with 1971–2003 Dodge RAM B100, B150, B1500, B200, B250, B2500 Van 2WD. Please check our other listings for other lift heights.

The 2.5 front and 2 rear configuration gives your Dodge B-Series van a more pronounced lift than the entry-level kit while still staying within the bolt-on, no-modification territory that keeps the installation manageable. Both spacer sizes use the same bottom-mounted design specific to the B-Series lower control arm setup, and the matched rear blocks ensure both axles rise proportionally. Professional installation by a qualified technician with proper equipment is strongly recommended due to extreme suspension loads. Please inspect all parts before beginning installation.

Browse our full range of Lift Shocks to explore additional shock options for your Dodge B-Series van. For a complete breakdown of how coil spring spacers and block kits work together in a suspension lift, read our guide on how a truck suspension lift kit works.

Order the RTZ Dodge B150 B250 2.5 lift kit for sale today and give your Dodge van a more substantial front and rear rise in one complete package.

Frequently Asked Questions

• How does this 2.5/2 kit differ from the 2/1.5 kit for the same van?
  This kit adds half an inch more of front lift and half an inch more of rear lift: 2.5 inches front and 2 inches rear versus 2 inches front and 1.5 inches rear. Both kits use the same bottom-mounted solid aluminum front spacer design and Gorilla rear steel blocks, with DoestchTech DT9000 shocks included in both.
  
  
• Why are these front spacers bottom-mounted instead of top-mounted?
  The 2WD Dodge B-Series van uses a lower control arm coil spring setup that requires the spacer to seat beneath the spring in the lower control arm, a different front suspension architecture than strut-based or top-mounted coil-over systems.
  
  
• Does this kit fit vans through 2003?
  Yes. This kit is compatible with 1971–2003 Dodge RAM B100, B150, B1500, B200, B250, and B2500 vans, 2WD. Please check our other listings for other lift heights and configurations.