RTZ Ford E150 E200 E250 E300 E350 Van 69-15 Front 2.5" Lift Leveling Aluminum Coil Spring Spacers Kit

Product Overview

RTZ Lift coil springs will lift your Van 2.5" on the front while maintaining the Handling & Ride quality of sport suspension.

The front spacers are top mounted to your coils springs and are made of Solid Aluminum.

The actual height of the front spacers is less than the actual height of lift once installed and is based on a 2 to 1 lift ratio.

Too simple to lift or level your pickup & Designed in the USA!

Drop them in and Drive!

Note: PLEASE INSPECT PARTS BEFORE BEGINNING INSTALLATION. WE SUGGEST A PROFESSIONAL INSTALLER WITH PROPER EQUIPMENT TO HANDLE EXTREME LOADS AND THAT HAS TRAINING IN SUSPENSION SAFETY.

Designed in the USA & Life-time Warranty
Direct Drop-in Installation. No Cutting, No welding, or other parts needed. Just an alignment after the installation!
Improves appearance of your Van, More Ground Clearance and maintains comparable factory ride.
Non-Corrosive Aluminum
Compatible with 1969-2003 Ford Van E150 E200 E250 E300 E350. Includes: Solid Aluminum 2.5" Lift Leveling Coil Spring Spacers (check other listings for other models) Decal included.

Get 5% discount at checkout. Use code "RIDETRENDZ"

Reviews

(14 reviews) Write a Review

14 Reviews Hide Reviews Show Reviews

5
Looking great when fitted

Posted by Jonas on Feb 16th 2023
1
Not as I expected

Posted by Ken on Aug 28th 2022
4
Not a great fit, but it fits

Posted by William m. on Apr 28th 2022

Radius is too tight for a diesel e350. It sits on the spring just enough to work and only barely enough to not be nervous about. Only lifted my front end by maybe an inch and a half, but again... it's just good enough to get by without complaining too much about it. Not the worst, not the best.
5
Level, Bingo!

Posted by LAFinn on Feb 16th 2022

I love my ubiquitous white 09 E350, but with the little 225 tires and sagging nose posture, it wasn't filling that tiny void in my ego that a truck is supposed to fill. But for lifting, or in my case just LEVELING the ford there aren't many good options. There are countless accounts of antilock brake and other computer problems from lifting and the requirement for new suspension parts. Anyway I occasionally searched the web for literally years. Finally, saw these on Amazon, ordered 2.5" spacers then immediately got cold feet because of the above reasons. In canceling the order i mentioned that I only really wanted 2" to level the truck anyway. BUT the company got back to me and offered 2" spacers instead! WHAAAA? A real person on Amazon? They reassured me that I wouldn't have any problems. So...HAPPY! Had installed 245 tires and an alignment yesterday and no problems. Suspension adjusted right into factory specs. COMMENTS: * Be smart and get good coil compression clamps. Those springs are serious business, be smart about taking the weight of the truck on and off the suspension. *I didn't need to remove the round retainer at the bottom of the coil, but I might make extended upper retainer clips to replace the original ones. * These were my results with a modest 2" lift (1" spacer results in 2" lift) your results may vary....
5
Great solution for leveling you’re econoline!

Posted by Knox Ludlow on Nov 19th 2021

If you have an econoline then you know the struggle to try and level these things out, this is a great, cheap solution to the problem. The only other way I've found is a kit from fordpartsone.com and weldtecs $2000 lifts.